![]() ![]() You can now access the two 10mm bolts that are the primary fixings for the door card and remove them. Once itââ,¬â,¢s removed the handle surround can be lifted up ââ,¬â€œ note its only held by 4 spring clips as shown in picture 2.įinally disconnect the wiring to the window switch and remove the handle assembly. Using the flat blade screwdriver and (working from below the handle) use it to push the inner panel back toward the door frame. This allows the door handle to be removed and access to the retaining bolts. So to removal, the first thing to do is prise out the inner door handle support. The part number is a VAG part and at the time of writing they were Ã,£0.20 each from a SEAT dealer however copies are available online and generally a bag of 20 can be bought for about Ã,£3. Removal is actually very easy but care should be taken and replacement clips should be sought prior to removal as they have a tendency to break during extraction. Itââ,¬â,¢s reinforced by the grab handle with two (3 on front doors) 10mm bolts to hold it firmly in place. The door card is hooked into place (Purple bar) and then clipped to the door using plastic clips around the outside. The door cards are fitted VW style, so use clips rather then screws as most true Fordââ,¬â,¢s do. The following is a detailed breakdown of how to remove the door card and membrane on a Mk2 Galaxy:
0 Comments
Leave a Reply. |